Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 103 (Automatic Transaxle Control System - 2.0L - Optima (Except HEV)) >> Transaxle Oil Temperature Sensor >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" ignition.
  2. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Disconnect the solenoid valve connector (A).
    Fig 1: Disconnecting Solenoid Valve Connector
    G11826188Courtesy of KIA MOTORS AMERICA, INC.
  4. Measure the resistance between + terminal (9) and - terminal (13).
    Fig 2: Solenoid Valve Connector Terminals
    G11826189Courtesy of KIA MOTORS AMERICA, INC.
  5. Check that the resistance is within the specification.
    Item Specification
    Temp. [(°C)°F]/Resistance (kΩ) (-40)-40/48.1
    (-20)-4.0/15.6
    (0)32.0/5.88
    (20)68.0/2.51
    (40)104.0/1.19
    (60)140.0/0.61
    (80)176.0/0.32
    (100)212.0/0.18
    (120)248.0/0.10
    (140)284.0/0.06
    (150)302.0/0.05
scientia non olet · About Mike's Workshop Manuals