Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> K900 V8 >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Program (Esp) System >> Electronic Stability Program >> Troubleshooting >> Communication with GDS is Not Possible. (Communication with Any System is Not Possible.) >> Inspection Procedures

Inspection Procedures

Check The Power Supply Circuit For The Diagnosis 

  1. Measure the voltage between terminal 16 of the data link connector and body ground.

    Specification:  approximately B+

    Fig 1: Measuring Voltage Between Terminal 16 Of Data Link Connector And Body Ground
    G11800864Courtesy of KIA MOTORS AMERICA, INC.
  2. Is voltage within specification?

    YES 

    • Check the ground circuit for the diagnosis.

    NO 

    • Remedy an open in the wire. Check and replace fuse from the engine compartment junction block.
scientia non olet · About Mike's Workshop Manuals