Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Forte5 SX, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Control System - 1.8L) >> Variable Charge Motion Actuator (VCMA) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2016 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect the VCMA connector.
  3. Check that the VCMA is not stuck by foreign material.
  4. Measure resistance between motor (+) and (-) control terminals of the motor.
  5. Check that the resistance is within the specification.

    Specification:  Refer to VARIABLE CHARGE MOTION ACTUATOR (VCMA)

  6. Measure resistance between voltage supply terminal and ground terminal of the position sensor.
  7. Check that the resistance is within the specification.

    Specification:  Refer to VARIABLE CHARGE MOTION ACTUATOR (VCMA)

scientia non olet · About Mike's Workshop Manuals