Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Forte5 EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Automatic Transaxle Control System - 1.6L) >> Line Pressure Control Solenoid Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Disconnect the solenoid valve connector (A).
    Fig 1: Locate Line Pressure Control Solenoid Valve Connector
    G11795251Courtesy of KIA MOTORS AMERICA, INC.
  3. Measure resistance between sensor signal terminal and sensor ground terminal.
  4. Check that the resistance is within the specification.
scientia non olet · About Mike's Workshop Manuals