Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Forte LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Clutch System) >> Concentric Slave Cylinder Assembly >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2015 Kia Forte5, 2015 Kia Forte Koup, and 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transaxle assembly.

    (Refer to "MANUAL TRANSAXLE for 1.6L or MANUAL TRANSAXLE for 1.8L & 2.0L")

  2. Remove the concentric slave cylinder assembly from the transaxle case by removing bolts (A).

    Tightening Torque: 

    19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb-ft)

    Fig 1: Concentric Slave Cylinder Assembly
    G09743171Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals