Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Forte LX, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 1.8L (3 Of 3) >> DTC P0620: Alternator Control Circuit >> Wiring Inspection >> Terminal And Connection Inspection

Terminal And Connection Inspection

  1. Disconnect the alternator and PCM/ECM and alternator connectors and inspect for looseness, poor connection, bending, corrosion, contamination, deterioration or damage. Reconnect the connectors.
  2. Connect the GDS and go to "Current Data".
  3. Monitor alternator values in Current Data, check and wiggle the harness (es), connector (s), and terminal (s).
  4. Any change in the values indicates a poor connection. Was a connector problem found?

    YES 

    NO 

scientia non olet · About Mike's Workshop Manuals