Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Forte LX, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Idle Stop & Go (ISG) System - 1.8L >> Oil Pump Unit (OPU) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to Remove Crash Pad Body - "Crash Pad")

  3. Remove the oil pump unit connector (A) and the DC/DC converter connector (B).
  4. Remove the oil pump unit (C) and DC/DC converter (D).
    Fig 1: Remove Oil Pump Unit And DC/DC Converter
    G11793951Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals