Repair Procedures: Removal

Disconnect the negative (-) battery terminal.
Disconnect the Electric Oil Pump (EOP) connector (A).

Fig 1: Disconnect Electric Oil Pump (EOP) Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the under cover after lifting the vehicle with lift. (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")
Remove the Electric Oil Pump (B) after removing the bolts (A-4ea).
Tightening Torque:

19.6 ~ 25.5 N.m (2.0 ~ 2.6 kgf.m, 14.4 ~ 18.8 lb-ft)

Fig 2: Remove Electric Oil Pump Bolts
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Electric Oil Pump
Courtesy of KIA MOTORS AMERICA, INC.