Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Control System - 1.8L) >> Variable Charge Motion Actuator (VCMA) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the VCMA connector (A).
    Fig 1: Locate VCMA Connector
    G11793905Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the VCMA (A) after removing 3 installation bolts.
Fig 2: Locate VCMA Installation Bolts
G11793906Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals