Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Control System - 1.8L) >> Variable Charge Motion Actuator (VCMA) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Disconnect the VCMA connector.
  3. Check that the VCMA is not stuck by foreign material.
  4. Measure resistance between motor (+) and (-) control terminals of the motor.
  5. Check that the resistance is within the specification.

    Specification:  Refer to VARIABLE CHARGE MOTION ACTUATOR (VCMA)

  6. Measure resistance between voltage supply terminal and ground terminal of the position sensor.
  7. Check that the resistance is within the specification.

    Specification:  Refer to VARIABLE CHARGE MOTION ACTUATOR (VCMA)

scientia non olet · About Mike's Workshop Manuals