Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Control System - 1.8L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose (Refer to REMOVAL AND INSTALLATION .
  3. Disconnect the ETC module connector (A).
    Fig 1: Disconnect ETC Module Connector
    G11793819Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (C), and then remove the ETC module from the engine.
Fig 2: Locate ETC Module From Engine
G11793820Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals