Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Smart Key Unit Diagnosis) >> DTC B1602-00: CAN Error >> Verification Of Repair

Verification Of Repair

WARNING: This page is about a different car, the 2015 Kia Forte5, 2015 Kia Forte Koup, and 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)" mode
  2. Clear DTC using a GDS.
  3. Drive the vehicle within DTC Enable conditions in General information.
  4. After selecting "Diagnostic Trouble Codes (DTC)" mode and check DTC is recorded again.
  5. Are any DTCs recorded?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System is performing to specification at this time.
scientia non olet · About Mike's Workshop Manuals