Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Automatic Transaxle Control System - 2.0L) >> Line Pressure Control Solenoid Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2015 Kia Forte5, 2015 Kia Forte Koup, and 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect the solenoid valve sensor connector.
  3. Measure resistance between sensor signal terminal and sensor ground terminal.
  4. Check that the resistance is within the specification.
scientia non olet · About Mike's Workshop Manuals