Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Automatic Transaxle Control System - 2.0L) >> Inhibitor Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2015 Kia Forte5, 2015 Kia Forte Koup, and 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the shift lever into the "N" position.
  2. Remove the air cleaner assembly.

    (Refer to "AIR CLEANER ")

  3. Remove the battery and the battery tray.

    (Refer to "BATTERY ")

  4. Disconnect the inhibitor switch connector (A).
    Fig 1: Inhibitor Switch Connector
    G09743386Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the shift cable mounting nut (A).
    Fig 2: Shift Cable Mounting Nut
    G09743387Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the manual control lever (B) and the washer after removing a nut (A).
    Fig 3: Manual Control Lever & Mounting Nut
    G09743388Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the inhibitor switch (A) after removing the bolts (2ea).
    Fig 4: Inhibitor Switch
    G09743389Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals