Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Engine Control System - 1.6L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Kia Forte5 and 2016 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the resonator and the air intake hose.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the ETC module connector (A).
    Fig 1: Locate ETC Module Connector
    G11794848Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the water hoses (A).
    Fig 2: Locate Engine Water Hoses
    G11794849Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the installation bolts, and then remove the ETC module (A) from the engine.
Fig 3: Remove ETC Module Installation Bolts
G11794850Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals