Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System >> Auto Defogging sensor >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the auto defogging sensor cover(A).
    Fig 1: Locating Auto Defogging Sensor Cover
    G11786509Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the connector and then remove the auto defogging sensor(A).
    Fig 2: Removing Auto Defogging Sensor
    G11786510Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals