Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior Trim & Glass >> Crash Pad >> Repair Procedures >> Replacement >> Heater & A/C Control Unit Replacement

Heater & A/C Control Unit Replacement

NOTE:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Put on gloves to protect your hands.
  1. Remove the center fascia lower panel.
  2. After loosening the mounting screws, then remove the A/C & heater controller unit (A) from the center fascia lower panel.
    Fig 1: Locating A/C & Heater Controller Unit With Mounting Screws
    G11785169Courtesy of KIA MOTORS AMERICA, INC.
  3. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector are connected in properly.
    • Replace any damage clips.
scientia non olet · About Mike's Workshop Manuals