Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System >> Blind Spot Detection Unit >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear bumper.

    (Refer to Body - "REAR BUMPER ")

  3. Remove the BSD unit (A) after loosening the mounting screws.
    Fig 1: Locating BSD Unit With Mounting Screws
    G11786423Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: Take care not to separate the bracket from rear bumper when removing the BSD sensor.
scientia non olet · About Mike's Workshop Manuals