Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System >> Blind Spot Detection Unit >> Repair procedures >> Installation

Repair procedures: Installation

  1. Install the BSD units to the rear bumper.
  2. Install the rear bumper.
  3. Connect the negative (-) battery terminal.
    NOTE: Take care not to confuse left side (slave) and right side (master) unit when installing.
Item Left (Slave) Right (Master)
Shape
G11786424
G11786425
Remarks Check the mounting screw hole shape
scientia non olet · About Mike's Workshop Manuals