Repair Procedures: Removal
WARNING: This page is about a different car, the 2015 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.
Pressure Side Impact Sensor
CAUTION:
- Removal of the airbag must be performed according to the precautions/procedures described previously.
- Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
- Do not turn the ignition switch ON nor connect the battery cable while replacing the front impact sensor.
- Disconnect the battery negative cable and wait for at least thirty seconds before beginning to work.
- Remove the front door trim.
(Refer to Body - "FRONT DOOR TRIM ")
- Disconnect the pressure side impact sensor connector (A) and remove the pressure side impact sensor mounting screws (B).