Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2015 >> Sedona EX >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System >> Blind Spot Detection Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the crash pad lower switch (A) after loosening the mounting screws.
    Fig 1: Crash Pad Lower Switch With Mounting Screw
    G10650967Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the connector (A) from the crash pad lower switch.
Fig 2: Crash Pad Lower Switch Connector
G10650968Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals