Repair Procedures: Installation
WARNING: This page is about a different variant/trim than selected.
- Install in the reverse order of removal.NOTE:
- Perform Transaxle Control Module (TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.
(Refer to "AUTOMATIC TRANSAXLE CONTROL SYSTEM (Repair Procedures)" in this section)
- Perform the procedures related in the ECM after replacing the TCM.
(Refer to "ENGINE CONTROL MODULEENGINE CONTROL MODULE (ECM) " in Engine Control / Fuel Section)
- Perform Transaxle Control Module (TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.