Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2015 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (Hybrid Control System - Optima HEV) >> HCU (Hybrid Control Unit) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
WARNING: Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries. Refer to GENERAL SAFETY INFORMATION AND CAUTION .
  1. Refer to "HPCU ".
    NOTE: The HCU is integrated into the HPCU that can't be disassembled. So refer to "HPCU " for the removal or installation procedure of the HCU.
  2. Perform the clutch pressure sensor calibration (Refer to "CLUTCH PRESSURE SENSOR ".
scientia non olet · About Mike's Workshop Manuals