Door Outside Handle

Disconnect the negative (-) battery terminal.
Remove the front door module.
Proceed to DOOR MODULE ASSEMBLY REPLACEMENT .
Remove the hole plug (B).
After loosening the mounting bolt, then remove the outside handle cover (A).
Tightening Torque:

0.7 ~ 0.5 N.m (0.07 ~ 0.1 kgf.m, 1.0 ~ 0.7 lb-ft)

Fig 1: Mounting Bolt & Outside Handle Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the outside handle (A) by sliding it rearward.

Fig 2: Removing Outside Handle
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the outside handle connector (A).

Fig 3: Outside Handle Connector
Courtesy of KIA MOTORS AMERICA, INC.