Repair Procedures: Installation

Install the inhibitor switch (A) and manual lever (B).
NOTE: Lightly tighten the mounting bolts and nut so that necessary adjustments can be made.
Install the SST (09480-A3800).

Fig 1: Installing SST (09480-A3800)
Courtesy of KIA MOTORS AMERICA, INC.
Tighten the bolts (A) and nut (B) with the specified torque.
Tightening torque:

(A) 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

(B) 13.7 ~ 17.7 N.m (1.4 ~ 1.8 kgf.m, 10.1 ~ 13.0 lb-ft)

Fig 2: Identifying Inhibitor Switch Bolts And Nut
Courtesy of KIA MOTORS AMERICA, INC.
Remove the SST(09480-A3800).
Install the shift cable by tightening the nut (A) and then connect the inhibitor switch connector (B).
Tightening torque:

12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)

NOTE: Adjust the shift cable before tighten the nut.
(Refer to Automatic Transmission Control System - "SHIFT CABLE ")

Fig 3: Identifying Inhibitor Switch Connector And Nut
Courtesy of KIA MOTORS AMERICA, INC.