Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2015 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Automatic Transaxle Control System - 1.6L) >> Inhibitor Switch >> Repair Procedures >> Inspection >> Signal Circuit Inspection

Signal Circuit Inspection

WARNING: This page is about a different car, the 2015 Kia Forte5 and 2015 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the Inhibitor switch connector.
  2. Ignition KEY "ON" & Engine "OFF".
  3. Measure voltages between each terminal and chassis ground during shift lever changed "P, R, N, D".

    Specification:  Refer to "SIGNAL CODE TABLE "

    SIGNAL CODE CHART

      P P-R R R-N N N-D D
    Signal "1" 12V 12V 0 0 0 0 0
    Signal "2" 0 12V 12V 12V 0 0 0
    Signal "3" 0 0 0 12V 12V 12V 0
    Signal "4" 0 0 0 0 0 12V 12V
scientia non olet · About Mike's Workshop Manuals