Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2014 >> Soul ! >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System - 1.6L) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the engine room under cover.

    (Refer to "ENGINE ROOM UNDER COVER ")

  3. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.
    Fig 1: Identifying Crankshaft Position Sensor Connector And Sensor
    G09772973Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals