Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2014 >> Soul ! >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 2) - 2.0L >> DTC P0625: Generator Field/F Terminal Circuit Low >> DTC Inspection >> Monitor GDS Data

Monitor GDS Data

  1. Connect GDS to DLC (Data Link Cable).
  2. Warm up the engine to normal operating temperature.
  3. Check the "Current Data"  about related DTC with GDS.
    Fig 1: Display - Engine Idle After Warm Up - Aircon ON Screen
    G09781425Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Display - Approx. 2000RPM At Acceleration Screen
    G09781426Courtesy of KIA MOTORS AMERICA, INC.
    1. Engine Idle after Warm Up
    2. Aircon "On"
    1. Approx. 2000RPM
    2. At Acceleration
  4. Are the parameters displayed correctly?

    YES 

    • Fault is intermittent caused by poor contact in the sensor's and/or PCM's connector or was repaired and PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

scientia non olet · About Mike's Workshop Manuals