Resolver Calibration

This calibration task is required each time the motor or inverter (MCU) is replaced or removed and remounted. This calibration is performed with the GDS.

• Conduct Calibration after replacing below components:
  • Hybrid Drive Motor
  • Hybrid Starter Generator (HSG)
  • Motor Control Unit (MCU)
    Fig 1: Screen Display - Motor/HSG Resolver Calibration (Test Condition)

    Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Screen Display - Motor/HSG Resolver Calibration (Calibration Completed)

    Courtesy of KIA MOTORS AMERICA, INC.