Repair Procedures: Removal

WARNING: This page is about a different car, the 2015 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.

(Type 1 for TF)

Turn the Ignition Switch OFF and disconnect the battery negative (-) cable.
Remove the fuel pump service cover (A) in the trunk.

Fig 1: Fuel Pump Service Cover
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel tank pressure sensor connector (A), and then remove the fuel tank pressure sensor.

Fig 2: Fuel Tank Pressure Sensor Connector

Courtesy of KIA MOTORS AMERICA, INC.

(Type 2 for QF)

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Remove the fuel pump service cover (A) in the trunk.

Fig 3: Fuel Pump Service Cover
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel tank pressure sensor connector (A), and then remove the fuel tank pressure sensor.

Fig 4: Fuel Tank Pressure Sensor Connector

Courtesy of KIA MOTORS AMERICA, INC.