Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2014 >> Forte5 EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Control System - 1.8L) >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2014 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the engine coolant temperature sensor connector (A).
  3. Remove the sensor (B).
    Fig 1: Engine Coolant Temperature Sensor Connector & Sensor
    G09748743Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION: Note that engine coolant may be flowed out from the water temperature control assembly when removing the sensor.
  4. Supplement the engine coolant (Refer to "ENGINE COOLING SYSTEM ").
scientia non olet · About Mike's Workshop Manuals