Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2014 >> Forte Koup EX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Automatic Transaxle Control System - 1.8L) >> Inhibitor Switch >> Repair Procedures >> Power Circuit Inspection

Power Circuit Inspection

WARNING: This page is about a different car, the 2014 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the Inhibitor switch connector.
  2. Ignition KEY "ON" & Engine "OFF".
  3. Measure voltage between supplied power and ground at inhibitor circuit.

    Specification  : Approx. 12V

scientia non olet · About Mike's Workshop Manuals