Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2014 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Manual Transaxle Control System - 1.8L & 2.0L) >> Control Shaft Complete >> Repair procedures >> Installation

Repair procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.
    NOTE:
    • When installing, set control shaft lever to neutral position.
      Fig 1: Identifying Control Shaft Lever
      G09743240Courtesy of KIA MOTORS AMERICA, INC.
    • When installing, apply the sealant as shown in the illustration.

    Specified sealant: MS 721-40 or MS721-38

    Fig 2: Identifying Grease Applying Area On Control Shaft Lever
    G09743241Courtesy of KIA MOTORS AMERICA, INC.
  2. After installing, check to be sure that this part operates as designed at each range of T/M side corresponding to each position of shift lever.
scientia non olet · About Mike's Workshop Manuals