Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2014 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Engine Control System - 1.8L) >> Variable Charge Motion Actuator (VCMA) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Disconnect the VCMA connector.
  3. Check that the VCMA is not stuck by foreign material.
  4. Measure resistance between motor (+) and (-) control terminals of the motor.
  5. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATION "

  6. Measure resistance between voltage supply terminal and ground terminal of the position sensor.
  7. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About Mike's Workshop Manuals