Testing And Repairs

WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.

Do not use wires or harnesses with broken insulation.
Replace them or repair them by wrapping the break with electrical tape.
After installing parts, make sure that no wires are pinched under them.
When using electrical test equipment, follow the manufacturer's instructions and those described in this Service Information.
If possible, insert the remover tool from the wire side (except waterproof connector).

Fig 1: Inserting Remover Tool From Wire Side
Courtesy of KIA MOTORS AMERICA, INC.
Use a probe with a tapered tip.

Refer to the user's guide in the wiring repair kit (Pub No.: TRK 015.)

Fig 2: Identifying Probe With Tapered Tip

Courtesy of KIA MOTORS AMERICA, INC.