Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2013 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Idle Stop & Go (ISG) System - 1.6L >> Seat Belt Switch >> Repair procedures >> Inspection

Repair procedures: Inspection

  1. Remove the connector from the switch.
  2. Check for continuity between terminals.
    Seat belt condition Continuity
    Fastened Non-conductive (∞Ω)
    Not fastened Conductive (Ω)
    Fig 1: Identifying Seat Belt Switch
    G08328101Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals