Removal and Installation

Disconnect the battery negative terminal.
Remove the driver airbag module. (Refer to the "REMOVAL .
Remove the steering wheel. (Refer to the REPAIR PROCEDURES .
Remove the steering wheel cover (A) after loosening the screws.

Fig 1: Locating Rear Cover Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the audio switch connector (A) and then loosen the mounting screw.

Fig 2: Identifying Cruise Control Switch Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the cruise control switch (A).

Fig 3: Identifying Cruise Control Switch
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: Be careful not to damage the hook when removing the switch.
Installation is reverse order of removal.