Removal and Installation

Disconnect the battery negative terminal.
Tightening torque:

4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
Remove the air-bag module from the steering wheel. (Refer to DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING .
Remove the steering wheel. (Refer to EPS CONTROL UNIT .
Remove the rear cover (A) after unfastening the screws.

Fig 1: Identifying Rear Cover
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the cruise control switch connector(A).

Fig 2: Identifying Cruise Control Switch Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the cruise control switch(B).

Fig 3: Identifying Cruise Control Switch
Courtesy of KIA MOTORS AMERICA, INC.