Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2012 >> Sorento SX, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Automatic Transaxle Control System - A6LF2) >> Transaxle Oil Temperature Sensor >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2014 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Remove the air duct.

    (Refer to "AIR CLEANER ")

  3. Disconnect the solenoid valve connector (A).
    Fig 1: Disconnecting Solenoid Valve Connector
    G09765549Courtesy of KIA MOTORS AMERICA, INC.
  4. Measure resistance between sensor signal terminal and sensor ground terminal.
  5. Check that the resistance is within the specification.
scientia non olet · About Mike's Workshop Manuals