Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2012 >> Sorento Base, 2.4L Eng VIN 1, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L MPI >> Intake Air Temperature Sensor (IATS) (VIN 1) >> Repair Procedures (VIN 1) >> Removal

Repair Procedures (VIN 1): Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the surge tank.
    Fig 1: Identifying Manifold Absolute Pressure Sensor Connector And Installation Bolt (VIN 1)
    G07415504Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals