Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2012 >> Sorento Base, 2.4L Eng VIN 1, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L GDI >> Crankshaft Position Sensor (CKPS) (VIN 6) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A).
    Fig 1: Crankshaft Position Sensor Connector (VIN 6)
    G09764320Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the protector (A).
    Fig 2: Protector
    G09764321Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the installation bolt (A), and then remove the crankshaft position sensor.
    Fig 3: Crankshaft Position Sensor Component Location (VIN 6)
    G09764322Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals