Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2012 >> Sedona EX >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) >> Body Network System >> Description And Operation >> Functions >> Head Lamps High Beam Function

Head Lamps High Beam Function

  1. Necessary conditions to switch ON :
    1. By pushing down the High Beam lever switch if
      • the Head lamp switch is in position 'Head lamp Low Beam' or the Head lamps Low Beam have been turned ON by the Auto light function.
    2. By pulling the High Beam lever switch toward the driver (Flash to pass activation)
    3. By the DRL function activation for Canada.
  2. Necessary conditions to switch OFF :
    1. By pulling back the High Beam lever switch (manual reset by the driver) or
    2. If the Head lamps Low Beam are turned OFF or if the Auto light function is active but the Auto light Sensor signal status is not 'HL ON') or
    3. By releasing the Flash To Pass activation and
    4. If the DRL function is deactivated for Canada.
  3. Functional diagram
    Fig 1: Head Lamps High Beam Function - Functional Diagram
    G07389703Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals