Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2012 >> Optima LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 79 (Engine Control System - 2.0L) >> Electric WGT Control Actuator >> Repair Procedures >> Inspection >> Motor

Repair Procedures: Inspection: Motor

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Disconnect the EWGA connector.
  3. Check that the EWGA is stuck by foreign material.
  4. Measure resistance between motor (+) and (-) control terminals of the motor.
  5. Check that the resistance is within the specification.

Specification:  Refer to SPECIFICATION .

scientia non olet · About Mike's Workshop Manuals