Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2012 >> Optima LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 58 (HEV Control System Diagnosis - HEV) >> DTC U0110: Lost Communication With Drive Motor Control Module-C-CAN >> General Information >> DTC Detecting Condition

General Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible cause
DTC strategy
  • CAN Signal Check
  1. Poor connection
  2. CAN communication
  3. Open or short in MCU communication line
Enable conditions
  • IG ON
  • HCU READY ON
  • Aux. Battery Voltage is between 9V and 16V
Threshold value
  • No signal via CAN for 0.5~2.0 seconds or receiving Error value
Diagnosis Time
  • 0.5 ~ 2 sec.
DTC
  • 2 Driving Cycle
MIL On Condition
  • 2 Driving Cycle
Service Lamp On Condition
  • 1 Driving Cycle
scientia non olet · About Mike's Workshop Manuals