Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2012 >> Optima LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Automatic Transaxle Control System - HEV) >> Inhibitor Switch >> Repair procedures >> Inspection >> Power Circuit Inspection

Power Circuit Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the Inhibitor swtich connector (A).
  2. Ignition KEY "ON"&Engine "OFF".
  3. Measure voltge between supplied power and ground at inhibitor circuit.

Specification:  Approx. 12V

scientia non olet · About Mike's Workshop Manuals