Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2012 >> Optima LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Control System - HEV) >> ETC (Electronic Throttle Control) System >> Repair procedures >> Inspection >> ETC Motor

ETC Motor

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Disconnect the ETC module connector.
  3. Measure resistance between the ETC module terminals 3 and 6.
  4. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATION "