Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2012 >> Optima LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (General Information - HEV) >> General Information >> Identification Number Locations >> Identification Number Description >> Dimensions Projected

Dimensions Projected

WARNING: This page is about a different variant/trim than selected.
  1. These are the dimensions measured when the measurement points are projected from the vehicle's surface, and are the reference dimensions used for used for body alterations.
  2. If the length of the tracking gauge probes is adjustable, measure it by lengthening one of two probes as long as the different value in height of the two surface.
Fig 1: Measuring Height And Projected Dimension Of Projected Points Using Tracking Gauge Probes
G08312246Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals