Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2012 >> Optima LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Smart Key Unit Diagnosis) >> DTC B1625: ECM Communication Data Failure >> Scantool Diagnostics >> Monitor Scantool Data

Monitor Scantool Data

WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.

■ Check DTC status 

  1. Check DTC on the PCM with Scantool.
  2. Check that there is any DTC related PCM.
  3. Perform Troubleshooting the DTC from PCM with appropriate DTC Troubleshooting Guide first.
  4. Repair or replace as necessary after erasing DTC with Scantool.
  5. Check DTC on SMK Module side and erase the DTC with Scantool.
  6. Has the DTC gone after erasing with scantool?

    YES 

    • Check poor connection between harness connector and Smartkey Module or PCM.

    : Thoroughly check the looseness, poor connection, bent, corrosion, contamination, deformation or damage of connector. Repair or replace as necessary and then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

scientia non olet · About Mike's Workshop Manuals