Repair procedures: Removal

Disconnect the negative (-) battery terminal.
Remove the center air vent (B) using the SST (A) (09840-1M100).
For coupe, refer to CRASH PAD . For sedan, refer to CRASH PAD .

Fig 1: Removing Center Air Vent
Courtesy of KIA MOTORS AMERICA, INC.

CAUTION: Always use the SST (09840-1M100) to prevent the damage when removing the air vent. For coupe, refer to CRASH PAD . For sedan, refer to CRASH PAD .
Remove the crash pad center fascia panel (A).
NOTE: Take care not to scratch the crash pad and related parts.

Fig 2: Crash Pad Center Fascia Panel
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the connectors (A) from the crash pad center fascia panel and heater control unit.

Fig 3: Crash Pad Center Fascia Panel Connector
Courtesy of KIA MOTORS AMERICA, INC.

Fig 4: Heater Control Unit Connectors
Courtesy of KIA MOTORS AMERICA, INC.
Remove the body control module (A) after loosening nuts and disconnecting connector.

Fig 5: Body Control Module
Courtesy of KIA MOTORS AMERICA, INC.