Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2011 >> Soul Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle Control System - 2.0L) >> Transaxle Oil Temperature Sensor >> Repair Procedures (A4CF2) >> Removal

Repair Procedures (A4CF2): Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery terminal.
  2. Lift the vehicle.
  3. Remove the under cover.
  4. Loosen the drain plug and drain the transaxle oil.
  5. Remove the oil pan.
  6. Remove the oil filter.
  7. Remove the valve body.
  8. Disconnect the main harness connector (A) from the valve body and remove oil temperature sensor.
    Fig 1: Identifying Main Harness Connector
    G06523636Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals